Scantronic 8136 Guide de l'utilisateur télécharger pdf (Page 7)

496339 Issue 1 7 of 44

The display shows the current status of the keypad back-light: 0 for

timed or 1 for back-light always ‘ON’, for example: 3: 1

9. Change the back light status as required by entering 0 or 1

10. Press ‘Menu’.

The display shows the current status of the keys:

0 for Active or 1 for Inactive, for example: 4: 0

11. Change the key status as required by entering 0 or 1.

(The keypad keys are normally left active = ‘ZERO’.)

12. Repeat 2 to 11 for any other keypad.

13. Set the ‘Prog’ switch to OFF and remove power to the keypads to lock

the address and options into the keypad(s).

Wiring

Figure 4. 8136 Main Connector

8136 Wiring

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Pas de commentaire

Scantronic 8136 Guide de l'utilisateur Page 7