Scantronic 8136 Guide de l'utilisateur télécharger pdf (Page 27)

496339 Issue 1 27 of 44

3. Wait while the remote PC establishes contact.

The display shows: CALL ANSWERED

followed by: SYSTEM UNDER

PC CONTROL

Other keypads in the system show: SYSTEM BEING

CONFIGURED!

When the Remote PC has completed downloading and signed off, the

display shows: DOWNLOAD

COMPLETE

followed by Menu 66.

Connecting a Local PC to Use Downloader (Menu 66).

The serial port can also by used as a link between a local PC and the sys-

tem. The local PC can run <DOWNLOADER> and change the system

programming in the same way as a remote PC.

Figure 13 shows the signals appearing at the pins of the serial port 9 pin

connector mounted on the end station PCB. The Figure also shows the pins

of a typical PC serial port, and the connections required in a cable to make a

local connection. Note that both ends of the cable should have female con-

nectors.

8136 Connecting to a Remote PC for the First Time

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Pas de commentaire

Scantronic 8136 Guide de l'utilisateur Page 27