Scantronic 8136 Guide de l'utilisateur télécharger pdf (Page 40)

40 of 44 496339 Issue 1

Note: When a user has authority to set more than one Level, but does not

specify which Level to set, the system chooses the first Level in each Parti-

tion that the user has authority to set. For example: a user has access to

Partitions 1 and 2. Partition 1 can be set by Level A (Areas 1 and 2) and

Level B (Area 1). Partition 2 can be set by Level C (Areas 3 and 4) and Level

D (Area 3). If the user keys in [Access Code] + [Enter] then the system sets

Level A and Level C (equivalent to Areas 1, 2, 3 and 4).

Users can reprogram limited parts of the system. The 8136 provides the

following set of user menus:

Menu 1: Setting with omissions.

Menu 2: Omit 24 hour zones.

Menu 3: System Options, including Enable/Disable Chime,

adjust the internal sounder volume, and Enable/

Disable Remote Set/Unset from a PC.

Menu 4: Test Options, including Walk Test and Bell Test.

Menu 5: Uploading/Downloading Authority. (Answer remote

call from Central Station, and Call Out to a remote

PC.)

Menu 6: Set time and date.

Menu 7: Change Area and zone names.

Menu 8: Change User Information (for example access

codes and authority levels).

Menu 9: Log Functions, including View Event Log and Print

Event Log.

To gain access to these menus from a keypad the user must key in:

[Access Code] + [Menu key] + [Menu Number] + [Enter]

See pages 42 and 43 for more details on user menus.

Installer Setting

When you leave Programming Mode the system will allow you to enter the

Installer access code and use menus 4, 5, 6, 7 and 9. In addition, you can

also set and unset the system by entering either:

[0] + [Installer access code] + [Enter].

or:

[0] + [Installer access code] + [Level key] + [Enter].

installer Setting 8136

1 2 ... 35 36 37 38 39 40 41 42 43 44

Pas de commentaire

Scantronic 8136 Guide de l'utilisateur Page 40