Scantronic 808 Guide de l'utilisateur télécharger pdf (Page 22)

22 496235 Issue 1

4. Press Enter.

The cursor moves to the end of the display: U2-ARMON

5. Press C or D to change between "N" (not permitted) and "Y" (permitted).

6. Press Enter.

The system saves the change and the display shows: U2-LOGN

Giving a User Log Access

1. Start menu 8.

2. Press Enter until the top line of the display shows "U1-LOGN".

3. Press A or B until the display shows the correct user number.

The display shows (for example): U2-LOGN

4. Press Enter.

The cursor moves to the end of the display: U2-LOGN

5. Press C or D to change between "N" (not permitted) and "Y" (permitted).

6. Press Enter.

The system saves the change and the display shows: U2- CHANN

Allowing a User to Change Zone Names

1. Start menu 8.

2. Press Enter until the top line of the display shows "U1- CHANN".

3. Press A or B until the display shows the correct user number.

The display shows (for example): U2-CHANN

4. Press Enter.

The moves to the end of the display: U2-CHANN

5. Press C or D to change between "N" (not permitted) and "Y" (permitted).

6. Press Enter.

The system saves the change and the display shows: U2-RST N

Allowing a User to Reset After an Alarm

1. Start menu 8.

2. Press Enter until the top line of the display shows "U1-RST N".

3. Press A or B until the display shows the correct user number.

The display shows (for example): U2-RST N

4. Press Enter.

The cursor move to the end of the line: U2-RST N

5. Supervisor

1 2 ... 17 18 19 20 21 22 23 24 25 26

Pas de commentaire

Scantronic 808 Guide de l'utilisateur Page 22