Scantronic 808 Manuel d'installation télécharger pdf (Page 23)

…always there

A 6 6 B

A 7 0 B

1 8

Pressing the numbered key changes the setting of the polarity from 0 to 1, or 1

to 0. A state of 1 means positive applied and a state of 0 means positive

removed.

Use keys to to select the pins that are opening/closing

channels. A state of 1 means that the alarm pin is an opening/closing channel a

state of 0 means that it is not an opening/closing channel.

Use keys to to designate alarm pins that are enabled.

A state of 1 means the pin is enabled and a state of 0 means the pin is disabled.

For fire stu channels 4 to 8 must be disabled.

The NVM is now completely programmed. Set the power switch to 0, remove the

programmed NVM and insert it in the STU at position IC2 (see page 18).

The address display changes to:

Press in sequence:

The address display changes to:

Press in sequence:

0 0 6 6

0 0 7 0

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 32 33

Pas de commentaire

Scantronic 808 Manuel d'installation Page 23