Scantronic 9800+ Guide de l'utilisateur télécharger pdf (Page 6)

6 of 14 496334 Issue 1

Wiring Keyswitches

Connect a keyswitch to the I/P and 0V terminals of the nearest keypad (see

Figure 4). Make sure you use a two position, unbiased keyswitch.

Figure 4. Keyswitch

Communications

The control unit can be fitted with communicators that conform to the stand-

ard Scantronic plug-on communicator footprint (for example, the 9056 and

9058 Plug-on Digital Communicators, a 960 Speech/Digital Communicator,

or a Plug-on Red Care Transmitter). For communicators that do not conform

the 9076-01 and 9076-02 can be used as interfaces to the system.

Wiring Keyswitches 9800

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Scantronic 9800+ Guide de l'utilisateur Page 6