Scantronic 9800+ Guide de l'utilisateur télécharger pdf (Page 5)

496334 Issue 1 5 of 14

Wiring Keypads

All keypads must be connected to Keypad terminals on the control unit PCB

or "daisy chained" to other keypads. Figure 3 shows the connections for each

keypad using the 9285 as an example:

Figure 3. Wiring the 9285 Keypad

Note: The output for the lock release interface must be a transistorised type. A

recommended type is RS Components 349-254. A SEPARATE 12 Volt DC

supply is required. Contact rating is 10 A.

Caution: Do not connect other devices (for example SAB, speakers and so on) in the

same cable as the remote keypad wiring.

9800 Wiring Keypads

1 2 3 4 5 6 7 8 9 10 ... 13 14

Pas de commentaire

Scantronic 9800+ Guide de l'utilisateur Page 5