Scantronic 9800+ Manuel d'utilisateur télécharger pdf (Page 18)

The chime function is only available if programmed during installation and

can only be selected if the system is unset. When set to chime, the internal

sounder will emit a ‘Chime’ tone if any normal alarm, entry route or final

door zone is opened. Where an exit terminator is fitted, this will act as a door

bell when the system is set to chime. To set the system to chime, proceed as

follows:

To disable Chime, repeat steps a) to d).

System set on chime.

To return to the normal ‘Day’

state press the clear button.

OMITday

Prog log

chime bell-test-walk

POWER

CLEAR

FAULT SERVICE OMIT

9800

1 2 3

4 5 6

7 8 9

Enter access code. Press chime key (No. 7).

OMITday

Prog log

chime bell-test-walk

POWER

CLEAR

FAULT SERVICE OMIT

9800

1 2 3

4 5 6

7 8 9

OMITday

Prog log

chime bell-test-walk

POWER

CLEAR

FAULT SERVICE OMIT

9800

1 2 3

4 5 6

7 8 9

(a) (b)

Chime Setting

- -

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Scantronic 9800+ Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Scantronic 9800+